Turn off a video device's IR LEDs and night vision

GoSafer Security Knowledge Base

This operational reference is organized for GoSafer Security customers and staff. Alarm.com product names are retained where required for technical accuracy.

Overview

Video device infrared LEDs can be disabled remotely at any time.

Platform	Customer Website
Content type	How-to / Configuration
Source last updated	2026-05-28

Procedure

To turn off the video device's IR LEDs

Note: If the video device does not have any IR LEDs, this option will not appear.

1. Log in to the GoSafer Security customer portal (powered by Alarm.com).
2. Click Video.
3. Click Settings.
4. Select the desired video device.
5. Click Video.

In Live Video Settings, click Image Settings.

In Advanced Image Settings, click the Infrared LEDs toggle switch to configure the setting as desired.

1. Click Save.

To disable night vision

Note: The ability to disable night vision is not supported for some cameras.

1. Log in to the GoSafer Security customer portal (powered by Alarm.com).
2. Click Video.
3. Click Settings.
4. Select the desired video device.
5. Click Video.

In Live Video Settings, click Image Settings.

In Advanced Image Settings, click the Night Vision toggle switch to configure the setting as desired.

Nightvision can be disabled on the following cameras

ADC-V516

ADC-V523/523X

ADC-V530

ADC-V723/723X

ADC-V724/724X

ADC-VC727P

ADC-VC827P

ADC-VC728PF

ADC-VC838PF

ADC-VC847PF

ADC-V729/V729AC/VC729P

ADC-VC7398PA

ADC-VC8498PA

ADC-VC8498P

ADC-VC8295P

1. Click Save.

Source and support

For GoSafer Security assistance, visit gosafersecurity.com.

Original Alarm.com reference: https://answers.alarm.com/Customer/Website_and_App/Video/Video_Settings/Turn_off_a_video_device's_IR_LEDs_-_Night_Vision

Always verify safety, installation, compatibility, and current UI details against the original manufacturer documentation before operational use.