Skip to main content

Create/edit an event-triggered lock automation rule

GoSafer Security Knowledge Base

This operational reference is organized for GoSafer Security customers and staff. Alarm.com product names are retained where required for technical accuracy.

Overview

Event Triggered Lock rules allow you to automatically lock or unlock your doors based on the status of your security system or additional locks.

PlatformApp + Web
Content typeHow-to / Configuration
Source last updated2025-09-17

Procedure

To create or edit a lock rule using the Alarm.com app

  1. Log in to the Alarm.com app.
  2. Tap [Menu].
  3. Tap Automation.
  4. Tap [Add].
  5. Tap New Rule.
  6. Tap When to select devices to trigger the rule.
  7. Tap to select the device type (e.g., Contact Sensor, Security Panel).
  8. Tap to select the trigger devices and status, then tap Done.
  9. Tap Then to select devices to be triggered.
  10. Tap to select the device type (e.g., Lock).
  11. Tap to select the devices and action, then tap Done.

In Type Rule Name Here, enter a name for the rule.

If desired, configure when the rule will run

  1. Tap Run at All Times to edit when the rule will run.
  2. Select one of the following options:

At All Times for the rule will be carried out any time of day.

Only during the following times to determine the specific days and times the rule will be carried out.

  1. Tap to select the days of the week the rule will be active.

Using the Starting at dropdown menu, select the start time for this rule.

Using the Ending at dropdown menu, select the end time for this rule.

  1. Tap Done.
  2. Verify the rule is configured with the desired settings.
  3. Tap Save.

To create or edit a lock rule using the GoSafer Security customer portal (powered by Alarm.com)

  1. Log in to the GoSafer Security customer portal (powered by Alarm.com).
  2. Click Automation.
  3. Click Add New Rule.
  4. Click New Rules Builder.
  5. Click When to select devices to trigger the rule.
  6. Click to select the device type (e.g., Contact Sensor, Security Panel).
  7. Click to select the trigger devices and status, then click Done.
  8. Click Then to select devices to be triggered.
  9. Click to select the device type (e.g., Lock).
  10. Click to select the devices and action, then click Done.

In Type Rule Name Here, enter a name for the rule.

If desired, configure when the rule will run

  1. Click Run at All Times to edit when the rule will run.
  2. Select one of the following options:
  3. Click to select At All Times for the rule will be carried out any time of day.
  4. Click to select Only during the following times to determine the specific days and times the rule will be carried out.
  5. Click to select the days of the week the rule will be active.

Using the Starting at dropdown menu, select the start time for this rule.

Using the Ending at dropdown menu, select the end time for this rule.

  1. Click Done.
  2. Verify the rule is configured with the desired settings.
  3. Click Save.

Source and support

For GoSafer Security assistance, visit gosafersecurity.com.

Original Alarm.com reference: https://answers.alarm.com/Customer/Website_and_App/Home_Automation/Rules/Create_edit_an_event_triggered_lock_automation_rule

Always verify safety, installation, compatibility, and current UI details against the original manufacturer documentation before operational use.

No comments to display

Back to top