Change the thermostat setpoint

GoSafer Security Knowledge Base

This operational reference is organized for GoSafer Security customers and staff. Alarm.com product names are retained where required for technical accuracy.

Overview

The thermostat setpoint can be managed remotely  so you can control the temperature on the go.

Procedure

To change the thermostat setpoint using the Alarm.com app

1. Log in to the Alarm.com app.

In the Thermostats card, verify the thermostat is in the desired mode.

1. Tap [Up] or [Down] to adjust the set point temperature(s).

Important: When using Auto mode, the Heat (left) and Cool (right) setpoints must be separated by at least 3 degrees to prevent the thermostat from toggling constantly between heating and cooling. Setting the Cool and Heat target temperatures less than 3 degrees from each other will waste energy without providing additional comfort.

To change the thermostat setpoint using the GoSafer Security customer portal (powered by Alarm.com)

1. Log in to the GoSafer Security customer portal (powered by Alarm.com).

In the Thermostats card, verify the thermostat is in the desired mode.

1. Click [Up] or [Down] to change the thermostat setpoint(s).

Important: When using Auto mode, the Heat and Cool setpoints must be separated by at least 3 degrees to prevent the thermostat from toggling constantly between heating and cooling. Setting the Cool and Heat target temperatures less than 3 degrees from each other will waste energy without providing additional comfort.

[Thermostat Auto Mode Customer Site]

Source and support

For GoSafer Security assistance, visit gosafersecurity.com.

Original Alarm.com reference: https://answers.alarm.com/Customer/Website_and_App/Home_Automation/Thermostats/Change_the_thermostat_setpoint

Always verify safety, installation, compatibility, and current UI details against the original manufacturer documentation before operational use.