Turn off a video device's IR LEDs and night vision

GoSafer Security Knowledge Base
This operational reference is organized for GoSafer Security customers and staff. Alarm.com product names are retained where required for technical accuracy.
Overview
Video device infrared LEDs can be disabled remotely at any time.
  
    
Platform
Customer Website
    
Content type
How-to / Configuration
    
Source last updated
2026-05-28
  
Procedure
To turn off the video device's IR LEDs
Note: If the video device does not have any IR LEDs, this option will not appear.
Log in to the GoSafer Security customer portal (powered by Alarm.com).
Click Video.
Click Settings.
Select the desired video device.
Click Video.
In Live Video Settings, click Image Settings.
In Advanced Image Settings, click the Infrared LEDs toggle switch to configure the setting as desired.
Click Save.
To disable night vision
Note: The ability to disable night vision is not supported for some cameras.
Log in to the GoSafer Security customer portal (powered by Alarm.com).
Click Video.
Click Settings.
Select the desired video device.
Click Video.
In Live Video Settings, click Image Settings.
In Advanced Image Settings, click the Night Vision toggle switch to configure the setting as desired.
Nightvision can be disabled on the following cameras
ADC-V516
ADC-V523/523X
ADC-V530
ADC-V723/723X
ADC-V724/724X
ADC-VC727P
ADC-VC827P
ADC-VC728PF
ADC-VC838PF
ADC-VC847PF
ADC-V729/V729AC/VC729P
ADC-VC7398PA
ADC-VC8498PA
ADC-VC8498P
ADC-VC8295P
Click Save.
Source and support
For GoSafer Security assistance, visit gosafersecurity.com.
Original Alarm.com reference: https://answers.alarm.com/Customer/Website_and_App/Video/Video_Settings/Turn_off_a_video_device's_IR_LEDs_-_Night_Vision
Always verify safety, installation, compatibility, and current UI details against the original manufacturer documentation before operational use.